| |
litele® MagCard Terminal |
|
|
|
litele®
MagCard Terminal |
APPLICATIONS:
litele® standalone magstripe terminal can be
connected to any PC or terminal to read/write the magstripe
data on the magnetic card or bank passbook. It is well known
for its highreliability and easy operation.it is widely
used in the banks, securities houses, POS, payment centers
and road traffic toll.
FEATURE
- Manual magcard swiping
- Can read/write any magstripe data complied with ANSI/ISO
or IBM standards.
- Auto-identification of the ISO/IBM format, no need to
have special data command format
- Data can be written in ISO or IBM format through the
command sets to select the choice
- Data can be written in track 2 with 210BPI or 75BPI through
the command sets to select the choice
- With LED indicators and beep sounds to show card status
- Can be customized to read non-standard magstripe data
format
- Can read/write any card/passbook made of any media, including
transparent magnetic card
RECORDING DENSITY:
- Track 1: 210 BPI
- Track 2: 75 BPI / 210 BPI (can be set by command)
- Track 3: 210 BPI
RECORDING CHARACTER:
- 210 BPI: max 110 bytes
- 75 BPI: max 39 bytes
- Track 1: max 76 bytes
SPEED:
- Card speed through the unit may vary from
- 3-125 ips at 75 BPI
- 3-50 ips at 210 BPI
POWER SUPPLY
- 5V/DC
- Current input
- less than 250mA
Life Cycle
INTERFACE:
ENVIRONMENT:
- Working temperature: 0°C to +50°C
- Working humidity: 10% to 90%
|
|
|
