PinKey (Pinpad) |
APPLICATIONS:
Litele® mechanical pinpad family are mainly used
as pin input devices for banks, POS terminals, payment centers
and securities. The keys on the pinpad can be completely
customized according to the user requirements.
TYPICAL APPLICATION:
Point of Salse PIN input device
Password pinpad in the bank counters
Access Control PIN input device
Stock price checking pinpad in securities houses
Manufacturing control instrument input device
Toll road input device
FEATURE:
Laser-engraved keycap symbols are wear-resistant and easy
to clean
Operating life cycle of individual keys:
Soft contact mode: 50 million strokes
Key click mode: 20 million strokes
Damaged keys can be easily replaced and hence save the replacement
cost
Support many connecting interfaces
Power can be retrieved from the keyboard port for RS232
interface
ELECTRONICS:
Interface: RS232C, 6-PIN MINI-DIN (PS/2), XT/AT
Power supply: +5V/DC
Current input: <100mA
MECHANICAL:
Total travel: 4-0.4mm
Pretravel: 2 +- 0.6mm
Peak load before make: 60 +- 20cN
ENVIRONMENT:
Storage temperature: -40°C to +60°C
Operating temperature: 0°C to +50°C
Operating humidity: 20% to 90%
EASY TO USE:
Installation:
1. Unplug the keyboard cable from the computer port;
2. Plug in the pin port cable of the Pinpad to the computer/terminal;
3. Plug in the keyboard into another port of the Pinpad
cable (No need for terminals)
Setting:
1. There is a switch setting control area with four adjustable
switches on the bottom of the Pinpad
2. Setting of switch:
|
Switch number\mode
|
ON
|
OFF
|
|
1
|
AT
|
XT
|
|
2*
|
Controlled by keyboard
|
Working Independently
|
|
3
|
reserved
|
reserved
|
|
4**
|
no voice
|
with voice
|
· * When switch 2 is at "ON" mode, the left "Ctrl" key of the keyboard is used to control
the Pinpad, press the left "Ctrl" key once,
you will have 15 seconds to start to input the password,
but if you have not input anything on Pinpad after 15
seconds, the Pinpad input mode will automatically shut
off.
· ** Switch 4 is only working for voice model pinpad.
When switch 4 is at "OFF" mode, both left and
right "Ctrl" keys of the keyboard are used to
control the Pinpad, the recorded voice will followed right
after you press the left "Ctrl" key— "Please
input your password"; if you press the right "Ctrl"
key, it will remind the customer "Please input again".
|
Litele® Pin Key
